Spray on Chrome Plating
Gold Plate Right on the Car
The coolest paints on the planet. NEW!
Small systems for plating jewelry
Compact, ecologiocal industrial plating systems
(with or without electricity)
Electroplating non-conductive parts
Receive a DVD and other goodies
As Seen on Speed TV,
Street Styles and Street Fury.
Instant Messaging
Skype account: goldtouchinc.com
AIM Account: GoldTouchInc1
Yahoo Messenger: goldtouchinc
Microsoft Msg: sales "at" goldtouchinc.com
Gold Touch, Inc.
12801 Berea Rd
Cleveland, OH 44111
800 940 7874
216 941 7400
216 941-7472 fax
New Patent Pending Cosmichrome Process is now available.
More news to come soon.
_________________________________________________________________
U.S. and International Patents Pending.
This patent pending technology is available for use only under license agreement.
Development 1
Cosmichrome tolerates high temperatures.
350ºF is now the upper temperature limit. You can now bake the topcoat at high temperatures. There is no longer the 100ºF/40ºC top coat baking limit. Cosmichrome will not get foggy if over heated about 100ºF when the topcoat is wet. The maximum temperature is 300ºF. Flash off the topcoat for 20 minutes and then bake at higher temperatures for faster and more durable curing. Be careful your part does not melt. Parts that won’t tolerate high heat themselves will still melt.*( Note the maxiumum temperature is now 350º as long as you use the HTW-209).
Development 2
Improved base coat filling, hiding and leveling.
As easy as our base coat has been to apply, it is even easier now. It hides substrate defects better. Less sanding and prep work is needed. Also it is even more reflective than before. Stronger run and drip resistance than before.
Order part number BCL Base Coat Gray
Development 3
Worry free 100% Reliable and Permanent Silver Adhesion to Base Coat.
As many of you already know, Cosmichrome has always had the best silver adhesion in the industry despite some of our competitors’ claims. With this new technology you will achieve perfect silver adhesion every time regardless of how long you dry the base coat. In fact, the only danger is under drying. The silver will adhere to the base coat even if the base coat has cross-linked and hardened. Let it dry a day, a week or even a month. It does not matter. Adhesion is perfect and permanent. Double activation uses our same A22 activator. No need to heat the Activator water unless it is cold.. Mix at room temp and it is ready in only 10 minutes. Icf the water is cold let it warm up to room temperature for an hour.
Development 4
100% Reliably and Permanent Topcoat Adhesion to Silver.
Using an adhesion promoting clear coat, the topcoat adhesion is reliable under nearly any humidity conditions in the paint booth. As soon as all the water is blown off the part it is immediately coated with the adhesion promoter. The adhesion promoter is single component and does not contain isocyanates. No mixing. This coating takes about one hour to force dry with moving air. Heat is not necessary but can be used. It is then coated with the normal VU-10.
Order part number HWT 209
Development 5
Improved Thermal Shock.
Cosmichrome holds together during extreme and rapid temperature changes on substrates that have high coefficients of expansion such as urethane plastics.Go from the car wash to sub freezing temperatures with no problems.
Development 6
Fast drying topcoat.
Dries and hardens in 24 hours. No need for additional after market hard clear coats.
Same VU-10 topcoat with a faster catalyst.
What this all means is that you will be able to produce a more durable finish that is much less sensitive to variations in the application. You will also be able to coat parts that are exposed to much higher temperatures than before.
You no longer have to worry about how long you baked the base coat and at what temperature. The dryer the better.
The base coat fills scratches better and is nore resistant to runs.
Meets or exceeds many if not most OEM paint standards.
Similar process to what we developed for LG’s production line but actually even more durable.
Reduces or eliminates many top coat reactions to contaminants.
Less sensitive to moisture and humidity during application and in the environment.
One piece of new but inexpensive equipment is required to produce the finish which we will be able to supply.
Weather and humidity will cause fewer problems during the application.
Own a competitor's system?
We'll help you face the world again!
Have you purchased a competing Spray On Chrome System?
Basecoat won't lay out?
Poor success rate.?
1 in 10 parts come out okay?
Neglected to check for satisfied references?
Didn't get samples or got pieces of tiles as samples?
Don't Blame Yourself.
Dozens of companies have switched from competing spray chrome products to Cosmichrome™.
Are you tired of orange peel in your base coat? Tired of burn marks around holes?
Tired of parts turning yellow in several months? SIlver fading awayin a few months?
If you are disappointed with the results and durability of your competing system,
don't be embarrassed. Call or email us for Help and references.
______________________________________________________________
Need something plated? Click here for a referral to a customer.